verifiedOEM-verified · Updated 2026
2007 Toyota Tundra Oil Capacity
5.7L V8 (3UR-FE)
Oil Capacity — With Filter
8
quarts
7.6 liters
Viscosity
oil_barrel0W-20
Full SyntheticWith oil filter8 qt (7.6 L)
Without oil filter7.6 qt
Recommended viscosity0W-20
Alternate viscosity5W-20 (if 0W-20 unavailable)
Oil typeFull Synthetic
OEM oil filter90915-YZZD1
Change interval10,000 mi / 16,100 km
Drain plug torque30 ft-lb (40 Nm)
verifiedSource: Toyota Owners Manuals & Warranties portal for 2007-2021 Tundra 5.7L V8, maintenance data / capacities section. · Human-verified
local_gas_stationFuel Tank Capacity Research Status
We have OEM fuel tank research on file for this vehicle family, but we are not publishing a tank value for this page yet because the exact model year or configuration still needs tighter verification.
Add drivetrain, trim, cab, or body-style metadata before publishing a runtime value.
How to Use This Spec
1
Drain old oil completely. Reinstall drain plug, torque to 30 ft-lb.
2
Install new oil filter (OEM: 90915-YZZD1). Pre-lubricate the gasket with clean oil.
3
Add 8 quarts of 0W-20 full synthetic oil through the filler cap.
4
Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.
warningImportant Notes
- • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
- • 5W-20 is approved only as a temporary alternative when 0W-20 is unavailable.
- • The drain plug gasket should be inspected and replaced if deformed.
Look Up Another Vehicle
Related Tools
Always verify against your OEM owner's manual. Specs may vary by trim and production date.