verifiedOEM-verified · Updated 2026
2014 Jeep Grand Cherokee Oil Capacity
3.6L Pentastar V6
Engine Option
Oil Capacity — With Filter
6
quarts
5.7 liters
Viscosity
oil_barrel5W-20
Full SyntheticWith oil filter6 qt (5.7 L)
Without oil filter5.7 qt
Recommended viscosity5W-20
Oil typeFull Synthetic
OEM oil filter68099474AA
Change interval8,000 mi / 12,900 km
Drain plug torque25 ft-lb (34 Nm)
verifiedSource: Jeep owner manual lookup for 2014-2021 Grand Cherokee, fluids and capacities section. · Human-verified
Fuel Tank Capacity
25 gal (94 L)
Capacity25 gal (94 L)
Verified for model year: 2014
How to Use This Spec
1
Drain old oil completely. Reinstall drain plug, torque to 25 ft-lb.
2
Install new oil filter (OEM: 68099474AA). Pre-lubricate the gasket with clean oil.
3
Add 6 quarts of 5W-20 full synthetic oil through the filler cap.
4
Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.
warningImportant Notes
- • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
- • The drain plug gasket should be inspected and replaced if deformed.
Look Up Another Vehicle
Other Engine Options
Related Tools
Always verify against your OEM owner's manual. Specs may vary by trim and production date.