verifiedOEM-verified

2018 Acura RDX Oil Capacity

3.5 L engine

With filter4.5 qtViscosity0W-20

Oil Capacity — With Filter

4.5
quarts
4.3 liters

Viscosity

oil_barrel0W-20
With oil filter4.5 qt (4.3 L)
Without oil filter4.2 qt
Recommended viscosity0W-20
OEM oil filterVerify by VIN or OEM parts catalog
Change intervalSee owner manual
Drain plug torqueSee owner manual
verifiedSource: 2018 Acura RDX Owner's Guide (BTX41818OG), Recommended Engine Oil section; Specifications pages 148-149 · Human-verified

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add 4.5 quarts of 0W-20 engine oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Always verify against your OEM owner's manual. Specs may vary by trim and production date.