verifiedOEM-verified · Updated 2026

2018 Toyota Camry Oil Capacity

2.5L 4-Cylinder (A25A-FKS)

Engine Option

3.5L V6

Oil Capacity — With Filter

4.8
quarts
4.5 liters

Viscosity

oil_barrel0W-20
Full Synthetic
With oil filter4.8 qt (4.5 L)
Without oil filter4.5 qt
Recommended viscosity0W-20
Oil typeFull Synthetic
OEM oil filter90915-YZZD4
Change interval10,000 mi / 16,100 km
Drain plug torque30 ft-lb (40 Nm)
verifiedSource: Toyota Owners Manuals & Warranties portal for 2018-2022 Camry, maintenance data / capacities section. · Human-verified
local_gas_stationFuel Tank Capacity Research Status

We have OEM fuel tank research on file for this vehicle family, but we are not publishing a tank value for this page yet because the exact model year or configuration still needs tighter verification.

Current evidence is same-platform only. Replace with an exact model-year OEM source before public display.

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 30 ft-lb.

2

Install new oil filter (OEM: 90915-YZZD4). Pre-lubricate the gasket with clean oil.

3

Add 4.8 quarts of 0W-20 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Other Engine Options

2018 Toyota Camry (3.5L V6)view chevron_right

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.