verifiedOwner-manual sourced

2019 BMW 3 Series Oil Capacity

2.0L TwinPower Turbo 4-Cylinder (B48B20)

Coverage: this maintenance-spec record applies to model years 2019-2024.
With filter5.3 qtViscosity0W-30Oil typeFull Synthetic

Oil Capacity — With Filter

5.3
quarts
5 liters

Viscosity

oil_barrel0W-30
Full Synthetic
With oil filter5.3 qt (5 L)
Without oil filter5 qt
Recommended viscosity0W-30
Alternate viscosity5W-30 (if 0W-30 unavailable)
Oil typeFull Synthetic
OEM oil filter11428575211
Change interval10,000 mi / 16,100 km
Drain plug torque18 ft-lb (25 Nm)
verifiedSource notes: Specs on this page are sourced from owner-manual or OEM reference material.

DIY oil change essentials

Ready for your oil change?

Buy at least 6 quarts of the listed oil spec, then confirm filter fit by VIN.

open_in_newOpens Amazon

As an Amazon Associate, Oil-Capacity.com earns from qualifying purchases. Product fit, oil viscosity, and filter part numbers should be verified with the vehicle's owner's manual or parts catalog before purchase.

Fuel Tank Capacity

15.6 gal (59.1 L)

verifiedOEM source
Capacity15.6 gal (59.1 L)

Verified for model years: 2019, 2024

Source: The all-new BMW 3 Series Sedan technical data

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 18 ft-lb.

2

Install new oil filter (OEM: 11428575211). Pre-lubricate the gasket with clean oil.

3

Add about 4.8 quarts of 0W-30 full synthetic oil first, then top off gradually.

4

Warm the engine, wait a few minutes, then verify oil level through the in-vehicle oil level display when equipped. Reset the oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • 5W-30 is approved only as a temporary alternative when 0W-30 is unavailable.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Always verify against your OEM owner's manual. Specs may vary by trim and production date.