verifiedOEM-verified · Updated 2026

2019 Ford Mustang Oil Capacity

5.0L Ti-VCT V8

Engine Option

2.3L EcoBoost 4-Cylinder

Oil Capacity — With Filter

9.5
quarts
9 liters

Viscosity

oil_barrel5W-50
Full Synthetic
With oil filter9.5 qt (9 L)
Without oil filter9 qt
Recommended viscosity5W-50
Oil typeFull Synthetic
OEM oil filterFL-820S
Change interval10,000 mi / 16,100 km
Drain plug torque21 ft-lb (28 Nm)
verifiedSource: Ford owner manual lookup for 2019-2024 Mustang, capacities and specifications section. · Human-verified
local_gas_stationFuel Tank Capacity Research Status

We have OEM fuel tank research on file for this vehicle family, but we are not publishing a tank value for this page yet because the exact model year or configuration still needs tighter verification.

Verify each published model year or narrow the runtime year range before promotion.

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 21 ft-lb.

2

Install new oil filter (OEM: FL-820S). Pre-lubricate the gasket with clean oil.

3

Add 9.5 quarts of 5W-50 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Other Engine Options

2019 Ford Mustang (2.3L EcoBoost 4-Cylinder)view chevron_right

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.