verifiedOEM-verified · Updated 2026

2019 Nissan Altima Oil Capacity

2.5L 4-Cylinder (KR25DDET)

Oil Capacity — With Filter

4.8
quarts
4.5 liters

Viscosity

oil_barrel0W-20
Full Synthetic
With oil filter4.8 qt (4.5 L)
Without oil filter4.5 qt
Recommended viscosity0W-20
Oil typeFull Synthetic
OEM oil filter15208-65F0E
Change interval5,000 mi / 8,000 km
Drain plug torque25 ft-lb (34 Nm)
verifiedSource: Nissan Manuals & Guides lookup for 2019-2024 Altima, maintenance / capacities section. · Human-verified

Fuel Tank Capacity

Multiple OEM values

verifiedOEM source
Option 116.25 gal (61.3 L)
Option 216 gal (60.6 L)

Drivetrain-dependent. Do not flatten into one runtime value without FWD/AWD metadata. Later years in the 2019-2024 record span should still be spot-checked.

Drivetrain-dependent. Do not flatten into one runtime value without FWD/AWD metadata. Later years in the 2019-2024 record span should still be spot-checked.

Verified for model year: 2019

Source: 2019 Altima Sedan Owner's Manual and Maintenance Information

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 25 ft-lb.

2

Install new oil filter (OEM: 15208-65F0E). Pre-lubricate the gasket with clean oil.

3

Add 4.8 quarts of 0W-20 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.