verifiedOEM-verifiedOEM-verified · Updated 2026
2020 Acura MDX Oil Capacity
3.5 L engine
With filter5.7 qtViscosity0W-20
Oil Capacity — With Filter
5.7
quarts
5.4 liters
Viscosity
oil_barrel0W-20
With oil filter5.7 qt (5.4 L)
Without oil filter5.4 qt
Recommended viscosity0W-20
OEM oil filterVerify by VIN or OEM parts catalog
Change intervalSee owner manual
Drain plug torqueSee owner manual
verifiedSource: 2020 Acura MDX Owner's Manual (BTZ52020OM), Recommended Engine Oil p. 584; Specifications p. 665 · Human-verified
Engine Option
How to Use This Spec
1
Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.
2
Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.
3
Add 5.7 quarts of 0W-20 engine oil through the filler cap.
4
Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.
warningImportant Notes
- • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
- • The drain plug gasket should be inspected and replaced if deformed.
Look Up Another Vehicle
Other Engine Options
Related Tools
Always verify against your OEM owner's manual. Specs may vary by trim and production date.