verifiedOEM-verified · Updated 2026
2020 Ford Explorer Oil Capacity
3.0L EcoBoost V6
Oil Capacity — With Filter
5.7
quarts
5.4 liters
Viscosity
oil_barrel5W-30
Full SyntheticWith oil filter5.7 qt (5.4 L)
Without oil filter5.4 qt
Recommended viscosity5W-30
Oil typeFull Synthetic
OEM oil filterFL-820S
Change interval10,000 mi / 16,100 km
Drain plug torque21 ft-lb (28 Nm)
verifiedSource: Ford owner manual lookup for 2020-2024 Explorer, capacities and specifications section. · Human-verified
Fuel Tank Capacity
18.6 gal (70.4 L)
Capacity18.6 gal (70.4 L)
Verified for model year: 2020
Source: 2020 Explorer Order Guide
How to Use This Spec
1
Drain old oil completely. Reinstall drain plug, torque to 21 ft-lb.
2
Install new oil filter (OEM: FL-820S). Pre-lubricate the gasket with clean oil.
3
Add 5.7 quarts of 5W-30 full synthetic oil through the filler cap.
4
Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.
warningImportant Notes
- • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
- • The drain plug gasket should be inspected and replaced if deformed.
Look Up Another Vehicle
Related Tools
Always verify against your OEM owner's manual. Specs may vary by trim and production date.