verifiedOEM-verified · Updated 2026
2020 Toyota Corolla Oil Capacity
2.0L 4-Cylinder (M20A-FKS)
Oil Capacity — With Filter
4.4
quarts
4.1 liters
Viscosity
oil_barrel0W-16
Full SyntheticWith oil filter4.4 qt (4.1 L)
Without oil filter4.1 qt
Recommended viscosity0W-16
Oil typeFull Synthetic
OEM oil filter90915-YZZD2
Change interval10,000 mi / 16,100 km
Drain plug torque30 ft-lb (40 Nm)
verifiedSource: Toyota Owners Manuals & Warranties portal for 2020-2024 Corolla, maintenance data / capacities section. · Human-verified
Fuel Tank Capacity
13.2 gal (50 L)
Capacity13.2 gal (50 L)
Verified for model years: 2020, 2022
Source: 2020 Corolla eBrochure
How to Use This Spec
1
Drain old oil completely. Reinstall drain plug, torque to 30 ft-lb.
2
Install new oil filter (OEM: 90915-YZZD2). Pre-lubricate the gasket with clean oil.
3
Add 4.4 quarts of 0W-16 full synthetic oil through the filler cap.
4
Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.
warningImportant Notes
- • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
- • The drain plug gasket should be inspected and replaced if deformed.
Look Up Another Vehicle
Related Tools
Always verify against your OEM owner's manual. Specs may vary by trim and production date.