verifiedOwner-manual sourced

2022 Acura MDX Oil Capacity

3.0 L engine models

With filter5.5 qtViscosity0W-20

Oil Capacity — With Filter

5.5
quarts
5.2 liters

Viscosity

oil_barrel0W-20
With oil filter5.5 qt (5.2 L)
Without oil filter5.2 qt
Recommended viscosity0W-20
OEM oil filterVerify by VIN or OEM parts catalog
Change intervalMaintenance Minder (max 12 months)
Drain plug torque30 ft-lb (40 Nm)
verifiedSource notes: Specs on this page are sourced from owner-manual or OEM reference material.

DIY oil change essentials

Ready for your oil change?

Buy at least 6 quarts of the listed oil spec, then confirm filter fit by VIN.

open_in_newOpens Amazon

As an Amazon Associate, Oil-Capacity.com earns from qualifying purchases. Product fit, oil viscosity, and filter part numbers should be verified with the vehicle's owner's manual or parts catalog before purchase.

Engine Option

3.5 L engine models

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 30 ft-lb.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add about 5.0 quarts of 0W-20 engine oil first, then top off gradually.

4

Warm the engine, wait a few minutes, then verify oil level using the dipstick or in-vehicle oil level display if equipped. Reset the oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Always verify against your OEM owner's manual. Specs may vary by trim and production date.