verifiedOEM-verified

2022 Hyundai Palisade Oil Capacity

3.8 GDI V6

With filter6.84 qtViscosity5W-30

Oil Capacity — With Filter

6.84
quarts
6.5 liters

Viscosity

oil_barrel5W-30
With oil filter6.84 qt (6.5 L)
Recommended viscosity5W-30
OEM oil filterVerify by VIN or OEM parts catalog
Change intervalSee owner manual
Drain plug torqueSee owner manual
verifiedSource: 2022 Hyundai Palisade Owner's Manual, Volume and weight section listing engine oil (drain and refill) at 1.71 US gal. (6.5 l) and recommended SAE 5W-30. · Human-verified

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add 6.84 quarts of 5W-30 engine oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.