verifiedOEM-verified

2022 Nissan Rogue Oil Capacity

2.5L 4-Cylinder (PR25DD)

With filter5.38 qtViscosity0W-20Oil typeFull Synthetic

Oil Capacity — With Filter

5.38
quarts
5.1 liters

Viscosity

oil_barrel0W-20
Full Synthetic
With oil filter5.38 qt (5.1 L)
Without oil filter5.13 qt
Recommended viscosity0W-20
Oil typeFull Synthetic
OEM oil filterVerify by VIN or OEM parts catalog
Change interval7,500 mi / 12,100 km
Drain plug torqueSee owner manual
verifiedSource: 2022 Nissan Rogue Owner's Manual, Capacities and Recommended Fluids/Lubricants p. 10-3; Nissan USA 2022 Rogue engine oil and filter maintenance guide. · Human-verified

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add 5.38 quarts of 0W-20 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.