verifiedOEM-verified

2023 Hyundai Palisade Oil Capacity

3.8 GDI V6

With filter6.86 qtViscosity5W-30Oil typeFull Synthetic

Oil Capacity — With Filter

6.86
quarts
6.5 liters

Viscosity

oil_barrel5W-30
Full Synthetic
With oil filter6.86 qt (6.5 L)
Recommended viscosity5W-30
Oil typeFull Synthetic
OEM oil filterVerify by VIN or OEM parts catalog
Change interval8,000 mi / 12,900 km
Drain plug torqueSee owner manual
verifiedSource: 2023 Hyundai Palisade Owner's Manual, Recommended lubricants and capacities section listing engine oil at 6.86 US qt. (6.5 l) with SAE 5W-30 and Normal Maintenance Schedule row for engine oil and engine oil filter every 8,000 miles (13,000 km) or 12 months. · Human-verified

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add 6.86 quarts of 5W-30 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.