verifiedSource cited

2024 Kia Telluride Oil Capacity

(Gasoline) 3.8 GDi

With filter7.08 qtViscosity5W-30Oil typeFull Synthetic

Oil Capacity — With Filter

7.08
quarts
6.7 liters

Viscosity

oil_barrel5W-30
Full Synthetic
With oil filter7.08 qt (6.7 L)
Recommended viscosity5W-30
Oil typeFull Synthetic
OEM oil filterVerify by VIN or OEM parts catalog
Change interval8,000 mi / 12,900 km
Drain plug torqueSee owner manual
verifiedSource: Kia official U.S. owners manual webhelp: recommended lubricants and capacities; scheduled maintenance service.

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add 7.08 quarts of 5W-30 full synthetic oil through the filler cap.

4

Run engine 30 seconds, check dipstick, top off to FULL mark if needed. Reset oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Or look up by VIN →

Related Tools

format_paint
Viscosity Guide
What's the best oil for your climate?
qr_code_scanner
VIN Lookup
Skip manual selection

Always verify against your OEM owner's manual. Specs may vary by trim and production date.