verifiedMatched reference data

2026 Ford F-550 Oil Capacity

Engine/trim match by VIN

With filter15 qtViscosity10W-30Oil typeFull Synthetic

Oil Capacity — With Filter

15
quarts
14.2 liters

Viscosity

oil_barrel10W-30
Full Synthetic
With oil filter15 qt (14.2 L)
Recommended viscosity10W-30
Oil typeFull Synthetic
OEM oil filterVerify by VIN or OEM parts catalog
Change intervalSee owner manual
Drain plug torqueSee owner manual
verifiedSource notes: Matched across multiple references. Confirm by VIN for trim-specific service.

DIY oil change essentials

Ready for your oil change?

Buy at least 15 quarts of the listed oil spec, then confirm filter fit by VIN.

open_in_newOpens Amazon

As an Amazon Associate, Oil-Capacity.com earns from qualifying purchases. Product fit, oil viscosity, and filter part numbers should be verified with the vehicle's owner's manual or parts catalog before purchase.

How to Use This Spec

1

Drain old oil completely. Reinstall the drain plug and tighten to the torque listed in the owner manual.

2

Install a new oil filter and pre-lubricate the gasket with clean oil. If the part number is not listed in your manual, confirm it by VIN.

3

Add about 14.5 quarts of 10W-30 full synthetic oil first, then top off gradually.

4

Warm the engine, wait a few minutes, then verify oil level using the dipstick or in-vehicle oil level display if equipped. Reset the oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Always verify against your OEM owner's manual. Specs may vary by trim and production date.