verifiedOwner-manual sourced

2014 Jeep Grand Cherokee Oil Capacity

5.7L HEMI V8

Coverage: this maintenance-spec record applies to model years 2014-2021.
With filter7 qtViscosity5W-20Oil typeFull Synthetic

Oil Capacity — With Filter

7
quarts
6.7 liters

Viscosity

oil_barrel5W-20
Full Synthetic
With oil filter7 qt (6.7 L)
Without oil filter6.7 qt
Recommended viscosity5W-20
Oil typeFull Synthetic
OEM oil filter68001297AA
Change interval8,000 mi / 12,900 km
Drain plug torque25 ft-lb (34 Nm)
verifiedSource notes: Specs on this page are sourced from owner-manual or OEM reference material.

DIY oil change essentials

Ready for your oil change?

Buy at least 7 quarts of the listed oil spec, then confirm filter fit by VIN.

open_in_newOpens Amazon

As an Amazon Associate, Oil-Capacity.com earns from qualifying purchases. Product fit, oil viscosity, and filter part numbers should be verified with the vehicle's owner's manual or parts catalog before purchase.

Engine Option

3.6L Pentastar V6

Fuel Tank Capacity

25 gal (94 L)

verifiedOEM source
Capacity25 gal (94 L)

Verified for model year: 2014

Source: 2014 Grand Cherokee User Guide (Includes SRT)

How to Use This Spec

1

Drain old oil completely. Reinstall drain plug, torque to 25 ft-lb.

2

Install new oil filter (OEM: 68001297AA). Pre-lubricate the gasket with clean oil.

3

Add about 6.5 quarts of 5W-20 full synthetic oil first, then top off gradually.

4

Warm the engine, wait a few minutes, then verify oil level using the dipstick or in-vehicle oil level display if equipped. Reset the oil life monitor if equipped.

warningImportant Notes
  • • Always verify with your OEM owner's manual. Specifications may vary by trim level and production date.
  • • The drain plug gasket should be inspected and replaced if deformed.

Look Up Another Vehicle

Always verify against your OEM owner's manual. Specs may vary by trim and production date.